HQ-Power VDP1502RGLD5 Manual Del Usuario página 5

1. microphone
2. microphone LED
3. power LED
4. laser aperture
6. Use
• DIP Switch Setting
• DMX mode: DIP switch 10 must always be on. For the desired address see table below:
SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8 SW9 SW10 Function
X X
X X
• Sound-activated mode: When there is no DMX signal, and DIP switch 10 is on and DIP switch 9 is off, the unit will
go in sound-activated mode. Adjust the sensitivity using the knob on the back of the unit.
• Automatic mode: When there is no DMX signal, and DIP switch 9 and 10 are on, the unit will work in automatic
mode.
• Master/slave mode: Set one device as master device and all other connected devices as slave devices. All slave
units will work according to the master device.
• Detailed DMX Values Per Channel
Channel Function
1
RUNNING
2
DIRECTION
3 RUNNING SPEED
4 TWINKLE SPEED
COLOUR
5
SELECTION
• DMX512 Connection
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-
pin XLR input of the VDP1502RGLD5. Multiple VDP1502RGLD5s can be linked through serial linking. The linking
cable should be a two-core screened cable with XLR input and output connectors.
• DMX512 Chain with Termination
VDP1502RGLD5
All manuals and user guides at all-guides.com
5. sensitivity knob
6. fan
7. power input and fuse
8. DIP switches
X X X X
X X X X
DMX setting
From
0
64
MODE
128
192
0
64
128
0
0
0
100
200
A DMX terminator is recommended for installations where the DMX cable has to run a
long distance or is in an electrically noisy environment (e.g. discos). The terminator
prevents corruption of the digital control signal by electrical noise. The DMX terminator is
simply an XLR plug with a 120 resistor between pins 2 and 3, which is then plugged into
the XLR output socket of the last device in the chain.
Please see illustrations.
X X 0
X X 1
To Description
63 Blackout
127 Sound activation
191 Auto mode
255 DMX mode
63 Forwards rotation
127 Static
191 Backwards rotation
255 From fast to slow
255 From fast to slow
99 Red + green (yellow)
199 Red
255 Green
5
9. DMX input
10. DMX output
11. on/off switch
1
Sound activation
1
Auto mode
0
DMX/Slave
HQPOWER