Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Ensure the immersion blender motor is unplugged.
2.
Attach the motor assembly to the blending wand or whisk attachment by lining up the channels and making a one quarter turn counter-clockwise until you
hear the unit click into place.
NOTE: NEVER use a chopper attachment with this product.
WARNING! Use caution when blending in a glass container, pots, and pans. Remove pot/pan from heat before blending.
3.
Place food to be processed into a sufficiently large mixing bowl, container, cup, or saucepan.
NOTE: The container should only be half full or less when blending liquids or when making a puree of fruit and/or vegetables.
WARNING! TO AVOID DAMAGE AND INJURY! NEVER use an immersion blender in a Vitamix blending container with a blade assembly.
4.
Plug the power cord into a power outlet.
5.
Lower the blending shaft into the container with ingredients. Ensure the blending wand or whisk attachment are completely submerged in the ingredients.
Submerge the shaft to a maximum 2/3rd its length. NEVER submerge the motor body in ingredients.
NOTE: When beginning to blend, especially with hot ingredients, ALWAYS start on low speed and increase the speed to avoid splattering and over-processing. Use
a tall container or make small quantities to reduce spillage or splash. NEVER use the immersion blender for more than three (3) minutes continuously.
6.
Press and hold the On/Off Button to start blending on Speed 1. Rotate the Speed Select Dial to increase to Speed 2. Release the On/Off Button at any time
to stop blending.
7.
Slowly move the immersion blender around in the ingredients to ensure the best blend.
8.
To stop, release the
On/Off Button
the blending container.
12
BLADES ARE EXTREMELY SHARP
Handle with extreme care to avoid injury.
TO AVOID DAMAGE AND INJURY
NEVER use an immersion blender in a Vitamix Container with a blade assembly.
Use caution when blending in a glass container, pot, pan, and on the stove
NEVER detach the wand or whisk from the motor base while the unit is plugged
in. Unplug the unit before removing attachments.
. Allow the blending wand or whisk attachment to come to a complete stop before removing the immersion blender from
U
se
WARNING
top.
146264
Publicidad
