Publicidad
EN
PLEASE CAREFULLY READ
THIS MANUAL AND KEEP IT
IN A SAFE PLACE
SAFETY RECOMMENDATIONS
• This clock works with 3 x AA/LR6 batteries, rechargeable
or not.
• Please use only suitable batteries.
• Replace the batteries when empty. Do not mix a used
and a charged battery.
• Do not try to recharge a non-rechargeable battery.
• Do not throw batteries into a fire.
• Always ensure that the batteries are removed from
the clock when it is not used for a long period of time.
The manufacturer is not responsible for any damage caused by improper use.
TECHNICAL SPECIFICATIONS
• Model Number: NA-411
• Input: 3 x AA/LR6 battery, rechargeable or not
• Dimensions: Dia 30.5 x 4.2 cm
• Beech wood case and glass cover
• Beechwood hour, minute and second hands
STARTING THE CLOCK AND SETTING THE TIME
1. Insert 1 x AA/LR6 rechargeable or non-rechargeable battery (not included), observing the polarity
indicators.
2. Turn the time setting knob on the back of the case clockwise to the desired time.
WARNING: DO NOT TOUCH THE NEEDLES WITH YOUR HANDS.
• Once you have used batteries, do not throw them in
the bin but take them to the nearest collection point.
• Handle the clock with care, as the window that pro-
tects the dial and hands is made of glass.
• Do not touch the needles with your hands. Use the dial
on the back of the clock to set the time.
• Do not block the speaker output.
• Hour sound: 12 birdsongs - see reference
table p. 8
• Light sensor for automatic shutdown of bird
songs when dark
• Quiet and precise movement at less than
30 s/month
6
STARTING UP THE BIRDSONG
Please follow the instructions below to ensure that the correct bird sound is heard for each hour:
1. Pre-set the clock to 1:00 before inserting any battery, using the cogwheel at the back of the
clock (lower compartment).
2. Insert two AA/LR6 batteries into the sound movement battery compartment (upper), then
insert one AA/LR6 battery into the clock movement battery compartment (lower), following
the polarity (+/-) symbols as indicated.
3. Now you can adjust the clock to the right time, using the cogwheel again.
Note: to use the clock without the birdsong, remove or simply do not insert the two AA batteries in
the upper case. The clock will continue to run but will no longer sound every hour.
• Light sensor: this clock has a "silent" function controlled by a light sensor. This automatically switches
NOTE
1. The time of the clock and/or the sounds of the birdsongs may fluctuate very slightly during the year.
If the time and/or sound fluctuates significantly, please change the batteries.
2. If after inserting the batteries, the clock or the birdsong does not work, check that the batteries are
inserted correctly and with the correct polarity.
CARE INSTRUCTIONS
• To clean the outer surface of the clock, use a soft, dry, clean cloth to remove fingerprints and dust.
• Do not use solvents, abrasives or polish.
PRECAUTIONS FOR WALL MOUNTING
1. Handle the clock with care, as the window that protects the dial and hands is made of glass.
2. Mount the clock on a flat, smooth vertical wall.
3. Before drilling into a wall, pay attention to any wires and pipes that may be embedded in the wall.
7
Publicidad
