Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
DISPLAY
Press DISPLAY to display the current information on
the screen.
When the TV receives a digital signal, the digital
information will appear.
62-001 HDTV Moving Picture1
Sleep Timer
Off
CH-1
TV-MA
Digital
Air
English
No Program Information is available
Full
1080i
•
Channel number
•
•
Channel label (if preset)
•
•
V-Chip rating
•
•
Sleep timer
•
•
Program guide
•
•
Resolution
When the TV receives an analog signal, the analog
information will appear.
14
Sleep Timer
Off
Analog Cable
Mono
Full
480i
•
Channel number
•
•
V-Chip rating
•
•
Sleep timer
•
•
Audio information
•
(Stereo, SAP or Mono)
Press DISPLAY again to clear the call display.
NOTE:
•
After a few seconds, DISPLAY screen will return to
normal TV-operation automatically.
RECALL
This button allows you to go back to the last channel
selected by pressing RECALL. Press RECALL again to
return to the last channel you were watching.
MUTE
Press MUTE to switch off the sound. The TV's sound
will be silenced and "Mute" will appear on the screen.
The sound can be switched back on by pressing this
button again or the VOL + or –.
SLEEP
To set the TV to turn off after a preset amount of time,
press SLEEP on the remote control. The clock will
count up 10 minutes for each press of the SLEEP but-
ton (Off, 0h 10m, 0h 20m, ..., 2h 0m). After the sleep
timer is programmed, the display will appear briefly
every ten minutes to remind you that the sleep timer
is operating. To confirm the sleep timer setting, press
SLEEP and the remaining time will be displayed for a
few seconds. To cancel the sleep timer, press SLEEP
repeatedly until the display turns to Off.
37I0521A_EnSp.indb 19
37I0521A_EnSp.indb 19
Quick guide for menu
operation
Call menu and for example: Select Language.
1
Press INPUT SELECT to select TV mode.
2
Press MENU. The TV menu screen will appear.
Station name
Broadcast program name
3
: Select
Signal type
Press
Audio language
ENTER.
Picture size
4
Press
/
...on the following pages the menu can be called
in the same way as here.
5
Press EXIT to return to the normal screen.
NOTE:
•
If no buttons are pressed for more than about 60
seconds, the menu screen will return to normal
operation automatically.
Channel label (if preset)
Signal type
Picture size
Resolution
Main Menu
>>
Picture
Audio
Channel
Lock
Setup
ENTER:Set
or
to select "Setup", then press
or
to select "Language", then press
to select the desired language.
3/24/09 4:20:11 PM
3/24/09 4:20:11 PM
or
19
Publicidad
