Swiss Made Sylvac S Mike PRO Instrucciones De Uso página 14

14
13. Personnalisation of the instrument
It is possible to customize access to your instrument's functions, for
more information see the manufacturer's website (requires a connec-
tion to your instrument, via a Proximity cable, or Bluetooth®).
Options:
- Disable or enable desired functions.
- Modify access to advanced functions (direct access).
14. Instrument connection
The instrument can be connected to a peripheral via a Proximity cable,
or via Bluetooth®. See chap. 2 for cable connections.
Measurements can be transmitted, and the instrument can be
controlled by predefined duplex controls, as listed in the main com-
mands section below.
15. List of main commands
Selection and configuration
BAT?
ID ?
IN
KEY?
KEY 0 / KEY 1
ECO 1 / ECO 0
ECO?
LCAL?
LCAL JJ.MM.[AA]AA
MM
NCAL?
NCAL JJ.MM.[AA]AA
NUM ?
NUM X..X (jusqu'à 20car)
Transmits battery status (BAT1=ok or BAT0=low)
Transmits instrument identification (SY276)
Activates Inch unit
Transmits keyboard status (KEY0 or KEY1)
Disables/enables keypad (except Send Data)
Enables / disables economy mode
Current economy mode
Transmit date of last calibration (DD.MM.YYYY)
Enter date of last calibration
Activates mm unit
Transmit date of next calibration (DD.MM.YYYY)
Enter date of next calibration
Transmit instrument number
Modifies instrument number (10 characters)