Swiss Made Sylvac S Mike PRO Instrucciones De Uso página 9

7. F function (depends on model)
MIN
The high-speed micrometer features a spring-loaded spindle. This
construction ensures high repeatability, thanks to the constant force
in the measuring zone.
When the F . mode is active, the minimum measuring value is auto-
MIN
matically stored and displayed.
The FMIN stroke value can be set by the user according to his needs
(0.010mm to 5.080mm depending on model).
Refer to chapter 6 to activate/deactivate or set the F
Example : Part Ø5.0mm Zone F
MIN
5. 2 25
DYNFMIN
5. 0 00
DYNFMIN
5. 0 00
DYNFMIN
5. 4 50
FMIN
function.
MIN
Start measurement
Measurement
As long as the contact
points are in the F
zone, the value displayed
remains unchanged.
If the contact points are
outside the F range,
MIN
the value corresponding
to the actual spindle posi-
tion is displayed.
MIN
EN