15. LED SIGNALLING LIGHTS
The B902L system features a menu with 3 operating modes: EMERGENCY
STOP SIGNAL, REAR LIGHT, POOR VISIBILITY LIGHT.
To scroll through this menu, with the system turned on, press the keys
"" and "" at the same time. Every time you press the key, the system
switches to the next mode.
1
EMERGENCY STOP SIGNAL
2
REAR LIGHT
3
POOR VISIBILITY LIGHT
4
SWITCH OFF
15.1.
Emergency Stop Signal ESS (mode 1)
The B902L system is equipped with a LED system to assist emergency braking. In case of sudden
braking, the LEDs on the B902L flash for a few seconds.
The braking level can be adjusted using the "N-Com EASYSET" programme or
through the "N-Com EASYSET App" for Smartphone Android, iPhone, iPad.
N.B.: We recommend turning off the Emergency Stop Signal on the Rider's helmet in case a Pillion
Passenger is riding on the back.
ESS sensitivity adjustment
Put the system in the "Configuration" mode: from a switched off system, press the "ON" key and keep
it pressed for 4 seconds, until you hear the voice announcement "
To adjust the sensitivity of the ESS lamp, press the key "" or "" until you hear the voice
ESS sensitivity
announcement "
Afterwards, press the key "" or "" to select the desired sensitivity level:
Level 1: low sensitivity, the ESS system will only detect significant braking.
Level 2 (default): average sensitivity.
Level 3: high sensitivity, the ESS system will also detect slight braking.
15.2.
Rear Light (mode 2)
The tail light makes it possible to activate the LEDs of the system, keeping them on during the entire
ride. If the emergency brake light is activated during braking, all LEDs will start flashing.
15.3.
Poor visibility light (mode 3)
The poor visibility light allows you to be more visible in case of fog or limited visibility. If selected, the
LEDs of the system will flash intermittently. If the emergency brake light is activated during braking,
all LEDS will flash more quickly.
MODE
", then press the "ON" confirming.
FUNCTIONS
Emergency stop signal.
Emergency stop signal.
Stable rear light.
Emergency stop signal.
Intermittent light in case of poor visibility.
Complete switch off of LED lights
Configuration Menu
".
25