Nolan N-Com R Serie Folleto De Instrucciones página 63

Pairing up CHANNEL 1
Pairing up CHANNEL 2
Pairing up CHANNEL 3
The Intercom connection with the selected channel is automatically activated at the end of the pair up
procedure.
16.3. Intercom function (one-to-one connection)
To establish an Intercom connection with one of the systems stored in memory, simply press the
command related to the channel where the system was saved.
Connection CHANNEL 1
Call CHANNEL 2
Call CHANNEL 3
Disconnection of active intercom
N.B.: In case the pre-setting position is empty, or the system being called cannot be reached within
the maximum range or it is already engaged in a phone call, you will hear an error voice message.
N.B.: In case the Intercom connection system falls outside the range (Intercom connection
interrupted), the B902L system will automatically try to reconnect every 8 seconds. Double beeps
will be emitted until the Intercom connection is not restored.
If you do not want automatic reconnection, press the "ON" key to stop the automatic reconnection
attempts.
The B902 system is equipped with the "VOX Intercom" function, which makes it possible to switch the
intercom on and off vocally.
In order to work properly, the VOX Intercom function must be enabled on both systems connected
via intercom.
The VOX Intercom function is disabled by default on the device.
You can enable / disable the "VOX Intercom" function and set the activation
sensitivity, using the N-Com EASYSET program or the N-Com EASYSET APP.
If the function is enabled, the system works as follows:
•
The intercom switches on automatically by saying any word out loud into the microphone of one
of the two helmets.
•
The intercom switches off automatically when both users do not speak for 20 seconds. If the
intercom conversation was started by pressing the manual connection key, the intercom must be
manually disconnected as well.
In the event that the VOX Intercom function is enabled on the device, but the last connected channel
is not available or cannot be reached, it is advisable to temporarily disable the VOX Intercom function
Briefly press "n".
Press the "n" key twice.
Press the "n" key three times.
Briefly press "n".
Press the "n" key twice.
Press the "n" key three times.
Briefly press "n".
27