Publicidad
Idiomas disponibles
Idiomas disponibles
cleaner carried out by third parties, or technical modifications to the vacuum
cleaner.
•
Before you switch on the vacuum cleaner make sure that the mains voltage
is the same as that shown in the technical details.
Overview of the components
1.
Motorized brush
3.
Long nozzle
5.
Aluminum tube
7.
Dust container
9.
Wind outlet board
11.
Dust container release button
Before using for the first time
1. Take the vacuum cleaner out of the packaging.
2. Remove the packaging and check that the dust container and safety filter are correctly
fitted.
3. Clean it with a soft, damp cloth and dry thoroughly. Do not immerse the vacuum
cleaner in water or any other liquid.
Assembling the vacuum cleaner
Use of the extension tube
– If there are any hard to reach or narrow areas then the extension tube is ideal.
– The extension tube needs to be fitted into position on the air inlet followed by
the required cleaning accessory.
– Fit the tube onto the main body's air inlet until it clicks into the position. If need
to remove the tube, hold the main body, press the release knob and remove the
tube.
Using long nozzle, sofa nozzle or pet brush
– Attach the nozzle or brush by pushing it into the suction opening as shown below.
Turn on the Vacuum cleaner by pressing the "On/Off" button to start use.
2.
Wall mount
4.
Sofa nozzle
6.
Multi-cyclonic filter
8.
Handle
10.
ON/OFF button
12.
Pet brush
English - 3
Publicidad
