HAEGER Venus Plus 600 Instrucciones De Uso página 9

Troubleshooting
1. Low suction when received new product.
Solution: Please check if all accessories are correct assembled and the bottom cover
was closed and locked.
2. Low suction after using few minutes.
Solution: Please check if there is big object block in the brush, tube or dust container,
it will be returned high suction power after removed.
3. Power cut off automatically after using a while.
Solution: The vacuum cleaner was equipped with motor thermostat (motor protector),
when dust is full or the appliance is long time using (more than 30mins), the motor
overheats very quickly, the power is cut-off automatically to protect appliance from
burning. Please unplug the device, empty the dust and clean the filter and wait motor
cool down (at least 30~60 minutes) before using again. If the vacuum cleaner does not
start again seek authorized technical assistance.
4. Low suction after using for some period.
Solution: please unplug the machine, empty the dust, disassembled the plastic/HEPA
filter and washing in water, the filters must be dried fully (or using cool wind by hair
dryer to dry) and then fixed back.
5. Motorized Turbo Brush doesn't work or stop working.
Solution: please check if the hair twists the brush roller and remove hair.
Important: The motorized turbo floor brush can only be using on hard floor; it will be
probably stopped working if using on carpet floor.
Technical Specifications
Features
Rated Power (W)
Rated Voltage
Dust container capacity (ml)
Max. Suction Power (W)
Max- Air flow
Max. Vacuum power
Sound power level (dB (A))
Model VC-600.047A
600W
220-240V~, 50/60 Hz
600ml
100W
16.73 l/s
18.5 Kpa
≤79.3 dB(A)
English - 7