HAEGER Venus Plus 600 Instrucciones De Uso página 6

– NOTE: the long brush is ideal for removing dust and dirt from folds in fabrics
stairs, in corners and awkward crevices.
How to use
1. Make sure that the filter is correctly installed.
2. Make sure the ON/OFF switch is in OFF position (turned off).
3. Chose if you want to use the appliance with or without the extension attachment.
4. Insert the power plug into the power outlet.
5. Push the ON/OFF switch.
6. Guide the nozzle over the surface to be cleaned, check whether the maximum fill
level on the collecting container has been reached. If this is the case, it needs to be
emptied.
7. After use, push the ON/OFF switch down again and unplug the appliance.
Care and Maintenance
Emptying the dust container
The dust container is totally visible and therefore when it reaches the first line of the plastic
filter holes, it needs to be cleaned.
1. Turn the vacuum cleaner off by pressing the "on/off" button to stop the motor.
2. Unplug the vacuum cleaner from the mains power supply.
3. Remove the dust container by pressing the dust container release button and remove
it from the main body. (1)
4. Turn the plastic filter and take it out and then take out the HEPA filter and empty the
dirt inside. Shake the dust container gently to remove any remaining dust. (2)(3)
5. Clean the filter in cold water and allow it to dry completely for at least 6 hours in
direct sunlight. (4)
6. Put the filter back to the dust container and put the dust container into the main
body until it locks back into it position.
English - 4