Von Arx FR 200 GENUS Instrucciones De Manejo página 6

FR 200 • Operating Manual
SAFETY INSTRUCTIONS AND MARKED PARTS
Von Arx machines and tools are state of the art technology and they are built according to the
construction guidelines of the EC. They have been tested and approved and are safe to operate
when used as described in the instructions.
There are dangers in using machines when the machine is used by an untrained person and
when it is not used as described in the operating instructions. Each person who is involved in
preparation, putting into operation, operation and maintenance must have read and understood
the entire Operating Manual, especially the safety instructions.
Marked parts in this Operating Manual
Read and always observe the safety instructions in this Operating Manual! The safety instruc-
tions are marked like this:
Failing to observe an instruction marked with this sign may lead to serious injury or death.
Failing to observe an instruction marked with this sign may damage the machine or cause
damage to property.
Marks any explanatory information or special instructions.
Safety instructions
Keep your workstation tidy!
• Untidiness in your work area may be a cause for accidents!
Use caution!
• Always be aware of your actions. Use common sense during work. Do not operate the ma-
chine or the tool when distracted.
Avoid an unnatural posture!
• Be sure to stand firmly on the ground while you are working and keep your balance at all
times.
Wear suitable protective clothing!
• Do not wear loose fitting clothing or jewelry, it might get caught by moving parts.
• Cover long hair with a hairnet.
• The machine operator must wear goggles, gloves, ear protectors and non-slip safety shoes.
• Wear a dust mask if the work generates dust.
Take your work environment into account!
• Never use the machine or the tool near explosive materials (the electric motor may give off
sparks)!
• Never use an electric tool that is damp or wet (electric shock)!
• Protect the machine or the tool from moisture, water, extreme heat, extreme cold, chemical
solutions and gases.
Keep other people away!
• Keep other people - especially children - away from the machine or the tool and the power cord.
• Keep other people out of your work area while you are working!
Check the machine or tool for potential damage!
• Prior to operating, safety devices or slightly damaged parts have to be inspected and their
satisfactory operating function for the intended purpose to be assured.
• Damaged safety features and switches must be repaired or replaced by an authorized ser-
vice center. Do not use the electric tool if switches cannot be switched on or off.
6
Safety instructions and marked parts