Electrical Connection; Prior To Initial Start-Up; Operating And Indicator Panel - Electrolux ARCTIS 75278-5 GA Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Electrical connection

Before initial start-up, refer to the appliance rating plate to ascertain if
supply voltage and current values correspond with those of the mains at the
installation location.
e.g.:
(i.e. 230 to 240 volts alternating current, 50 Hertz)
The rating plate is inside the appliance on the left.
A correctly installed, earthed socket is required for the electrical supply. The
supply must have a fuse rating of at least 10 Amps.
If the socket is not accessible once the appliance is built in, the electrical
installation must include suitable means of isolating the appliance from the
mains (e.g. fuse, cut-out, current trip or similar with a minimum contact
separation of 3 mm).
Attention: The mains connection cable may only be replaced by a skilled
electrician. Please contact your dealer or our customer service department
for repairs.
Prior to Initial Start–Up
• Please clean the appliance interior and all accessories prior to initial start-
up (see section: "Cleaning and Care").

Operating and indicator panel

A.
Freezer button ON/OFF
B.
Temperature setting button (+)
C.
Temperature display
D.
Temperature setting button (-)
E.
FROSTMATIC function "on" indicator (yellow)
F.
FROSTMATIC button
G.
Alarm reset light
H.
ALARM OFF button
32
AC
230 ... 240 V
230 ... 240 V~
B C
E
A
D
F
50 Hz
G
H
50 Hz or

Publicidad

Tabla de contenido
loading

Tabla de contenido