Descargar Imprimir esta página

MikroTik NetMetal 5 Serie Guía Rápida página 2

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 14
MikroTik devices are for professional use. If you do not have qualifications please seek a
consultant
https://mikrotik.com/consultants
Depending on the antenna used, you must set its gain
is to ensure that EIRP meets the limit set by the local authorities. This is done in the Quickset, CPE
menu.
First steps:
 Connect the device to the included PoE injector with Ethernet cable;
 Connect the PoE injector into the computer;
 Connect the power adapter to the PoE injector;
 Download WinBox configuration tool https://mt.lv/winbox;
 Default is not set, user name: admin and there is no password, use the Neighbors tab and connect
through MAC
address;
 Once connected configure the device, so it has an active Internet connection https://mt.lv/configuration;
 Upgrade the RouterOS software to the latest version https://mt.lv/upgrade;
 In the "QuickSet, CPE" menu set up the following: Choose your country, to apply country regulation
settings;
 Set the antenna gain, depending on the antenna used;
 Set up your router password in the bottom field.
Safety Information:
 Before you work on any MikroTik equipment, be aware of the hazards involved with electrical
circuitry, and be familiar with standard practices for preventing accidents. The installer should be
familiar with network structures, terms, and concepts.
 Use only the power supply and accessories approved by the manufacturer, and which can be found in
the original packaging of this product.
 This equipment is to be installed by trained and qualified personnel, as per these installation
instructions. The installer is responsible for making sure, that the Installation of the equipment is
compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the
device.
 This product is intended to be mounted outdoors on a pole. Please read the mounting instructions
carefully before beginning installation. Failure to use the correct hardware and configuration or to
follow the correct procedures could result in a hazardous situation for people and damage to the
system.
 We cannot guarantee that no accidents or damage will occur due to the improper use of the device.
Please use this product with care and operate at your own risk!
and set the installation setting to 'Outdoor'.
This

Publicidad

loading