Tabla de contenido
Publicidad
HULL
HOOD
HULL
Insert nut
NOTE:
Use the insert nut when:
A pop nut which was attached to the hull
slipped off or,
When a bolt which was fastened to an
insert nut or pop nut broke.
Part No.
EW2-62733-09
Nut 1
Thread direction 2
Slot to be threaded 3
NOTE:
Drilling size
Material
FRP or SMC
Brass
Example 1:
NOTE:
Before attempting to install the insert nut,
refer to "WATER VEHICLE FRP REPAIR
MANUAL".
The insert nut is used to repair the pop nut
designed for the ride plate.
(By repairing the FRP portion, the insert nut
can be used for all models.)
1. Remove:
Pop nut
2. Clean the surface to be scarfed and the
inside of the hull with acetone.
3. Scarf the shaded portion of the hull.
8-46
Part
Remarks
name
Stainless
Nut
steel, M6
Pilot hole diameter
9.1 ~ 9.2 mm (0.36 in)
9.4 mm (0.37 in)
E
Publicidad
Capítulos
Tabla de contenido
