Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance
Cleaning
Press the foil frame release buttons
to remove the outer foil frame (see
fig. 2). Turn the shaver on and rinse
the inner blade under running water
or in a basin (see fig. 3).
DO NOT USE BOILING or extremely
hot WATER.
Next, switch the shaver off, close the
foil frame and dry it gently. After the
shaving head is dry, replace the pro-
tective cap.
Replacing shaving head
components
If you use ihe shaver twice a week,
the outer foil may need to be replaced
every 1 year and the inners blades
every 2 years.
Replacing the outer foils
To remove the outer foil frame, press
the foil frame release buttons (see
fig. 2).
Then, squeeze the front and the back
side of the foil frame and lift up the
two knobs on the outer foils one at a
time (see fig. 4).
Inserting the new outer foils
Slip the foils into the frame and guide
the plastic edges onto the hooks in
the foil frame until they click into place
one ata time.
Replacing the inner blades
(see fig. 5)
Remove the inner blades by grasp-
ing them firmly at both ends and pull-
ing them straight away from the
shaver one at a time.
Inserting the inner blades
Hold the inner blades at both ends
and guide them onto the inner blade
mount.
Press them firmly into the mount un-
til it Snaps in place one at a time.
ATTENTION:
The product you have purchased
is powered by a nickel cadmium
battery which is recyclable. Atthe
end of its useful life, under vari-
ous state and local laws, it is ille-
gal to dispose of this battery into
your municipal waste stream,
Please call 1-800-8-BATTERY for
information on how to recycle this
How to remove the built-in
rechargeable battery
before disposal of the
shaver
(see fig. 2109)
.
Disassemble the shaver as explained
in 1 through 5, then remove the bat-
tery. The procedure described in fig.
10 is intended only for removal of the
rechargeable battery for the purpose
of proper disposal.
Publicidad
