Installation
Instructions
Space requirements
NOTE: There must be at least one wall stud within
cabinet opening.
Check the opening where the microwave
oven hood will be installed. The location must
provide:
• 2 inch x 4 inch wood studding and % inch
thickness drywall or plaster lath
• Support for microwave oven hood weight of
150 pounds plus the weight of items placed in
the oven or upper cabinet
• 30 inch wide minimum opening
• 13V2"inch clearance betwean the bottom of micro-
wave oven hood and the cooktop
• Protection from draft areas, such as windows,
doors, and strong heating vents
• Grounded electrical outlet (see "Electrical
requirements" in the =Microwave Oven
Safety" section)
66" rain.
Exhaust outlet
mounting
connectsto
heightfrom
30=rain,
31/4"x10"
floor
width required
duct
J
""23_.,%"door
open
Shipped ready for ventless (recirculating) opera_n,
converts to top or rear discharge.
CRITICAL DIMENSIONS
30" rain. from cooking surface
(or countertop) below microwave oven
to top of wall mounting bracket
13V2" min. to cooking surface
(or countertop) below microwave oven
I