Epilady Epilaser Manual página 39

3-1-3 Skin test on a small area
1. Prepare your skin.
2. Turn on the Epilaser
3. Follow the instructions in the "Treating your hairs" section on pages 37 to 40
to treat a single area.
4. Move the laser to the next treatment area and test it with a second treat-
ment area.
5. Please test up to 3 zones.
6. Wait 24 hours and check the tested areas. If there's no serious discomfort or
your hairs.
If you are unsure of the test result, do not use the Epilaser and contact the ven-
dor's customer support service before continuing to use it.
3-2 Treating your hairs
Note:
surface. On impact, the beam heats the follicle, weakening it and preventing
its active growth period. As hair grows in cycles, several treatments are
required. The hair will fall out on its own after a while, or you can remove it
once the treatments have been completed.
For optimum results, we recommend using your Epilaser at maximum
weeks. If the maximum level proves too sensitive for the area treated, reduce
per week.
English 37