eufy Security E340 Guia De Inicio Rapido página 5

PREPARING FOR
INSTALLATION (IMPORTANT)
Check local laws for installation
If you are outside of North America, installation and wiring must be
performed by a licensed electrician. Always follow code standards when
installing wired connections.
Shut Power Off at the Breaker
Risk of Electrical Shock
• Turn off the power at your circuit breaker or fuse box before continuing,
consult with a licensed electrician if needed.
• Switch on/off the lights to make sure the electricity to the installation
area is shut off.
• Verify that the power supply is a 100~240 VAC 50/60 Hz power source.
• Keep the breaker off at any time during the installation process.
NOTE: Do not use a dimmer switch or timer for this product.
OFF
OFF
06 EN
INSTALLING YOUR
FLOODLIGHT CAMERA
Separate the Mounting Bracket
Separate the mounting bracket from the camera and set it aside for later
installation.
Select a Location
You can mount the floodlight camera vertically on a wall or hang it from a
ceiling. With the power off at the breaker, remove the existing floodlight
if you have one.
WARNING:
electrical shock
WARNING: Risk of
electrical shock
•
Disconnect power at the
fuse or circuit breaker
before installing.
•
Verify that the supply
voltage is correct.
Connect fixture to a 100
VAC~240 VAC 50/60 Hz
power source.
Always follow code standards when installing wired
Wall Mounting Overhang Mounting
EN 07