Ryobi PBLBC01 Manual Del Operador página 11

KNOW YOUR PRODUCT
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
HANDLE OVERMOLD
Handle overmold provides added user comfort.
UNPACKING
This product requires assembly.
„ Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing
list are included.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
„ Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
„ Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
„ If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Power head
Bump feed head
Shoulder harness
Lower shaft
Brush cutter guard
Extension guard
Bike handle
Blade
Blade cover
Gear head locking tool
Combination wrench
Operator's manual
FEATURES
MODE SELECTOR
The product has different modes to switch between max
power and max runtime settings for the desired application.
TRIGGER LOCK-OUT
The trigger lock-out prevents accidental starting.
VARIABLE SPEED SWITCH TRIGGER
This tool has a variable speed switch that delivers higher
speed with increased trigger pressure. Speed is controlled
by the amount of switch trigger depression.
ASSEMBLY
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
ATTACHING THE BIKE HANDLE
See Figures 2-3.
„ Remove handle lock knob and locking plate from the
handle bracket assembly.
NOTE: Be careful that the spring stays in place.
„ Place the bike handle onto the handle bracket on the
drive shaft. Position the handle with the control panel
to the right.
NOTE: Be sure to place the knurled portion under the
locking plate.
„ Insert the tab of the locking plate into the slot of the
bracket.
„ Push the handle lock knob through the locking plate and
handle bracket.
7 — English