Publicidad
Idiomas disponibles
Idiomas disponibles
Important note in the case of repairs:
When returning the device for repair, please ensure for
safety reasons that it is free of oil and petrol when it is
sent to the service centre.
12.1
Ordering spare parts
Please provide the following information when order-
ing spare parts:
• Model designation
• Article number
• Type plate data
Spare parts / accessories
Brush - Article no.:
Snow blade - Article no.:
Collecting container - Article no.:
Battery - Article no:
12.2 Service information
With this product, it is necessary to note that the fol-
lowing parts are subject to natural or usage-related
wear, or that the following parts are required as con-
sumables.
Wearing parts*: Brushes, V-belt, engine oil, spark
plug, air filter, wheels, support wheel, rubber lip collec-
tion box, scraper bar snow blade
* may not be included in the scope of delivery!
13. Transport
m WARNING!
Danger of injury!
Unintended and unexpected start-up of the product
may lead to injuries.
- After loading, switch off the engine and, after the
engine has cooled down, remove the spark plug
connector from the spark plug.
- Remove the ignition key from the ignition lock.
- The product can cause severe crushing injuries due
to its own weight.
Allow the engine to cool down before transporting or
loading to avoid burns and to prevent fire hazards.
m The machine can fall and cause damage or injury if
it is not loaded properly.
When transporting over longer distances, drain the fuel
tank completely.
Secure the machine on the transport vehicle against
rolling, slipping or tipping over and also lash down the
machine.
14. Storage
m DANGER!
Risk of fire and explosion!
Storing the product near potential sources of ignition
can result in a fire or an explosion. This can lead to
severe burns or death.
- Eliminate possible sources of ignition, such as fur-
naces, hot water boilers with gas, gas dryers, etc.
5908703036
5908703811
NOTE!
5908703810
Risk of damage!
5908703027
If the product is not stored properly, the engine can be
damaged.
- Store the product protected against dirt, dust and
moisture.
14.1 Storage during extended breaks in operation:
If the machine will not be used for a period of more
than 30 days, follow the steps below to prepare it for
storage.
1.
Empty the fuel tank completely (see section 10.4).
Stored petrol containing ethanol or MTBE be-
comes stale within 30 days. Stale petrol has a high
rubber content and can thus clog the carburettor
and restrict the petrol supply.
2.
Start the engine and let it run until it stops. This
ensures that no petrol remains in the carburettor.
This prevents deposits from forming in the carbu-
rettor and potentially damaging the engine.
3.
Drain the engine oil from the engine while it is still
warm. Top up with new oil. (See section 9.1.)
4.
Disconnect the spark plug cable.
5.
Remove the ignition key (23) from the ignition lock
and store it securely to prevent unauthorised or im-
proper use by children and other persons.
6.
Use clean cloths to clean the machine.
7.
Store the machine in an upright position in a clean,
dry building with good ventilation.
Store the product and its accessories in a dark, dry and
frost-free place that is inaccessible to children. The op-
timum storage temperature is between 5 and 30˚C.
Store the product in its original packaging.
Cover the machine to protect it from dust or moisture.
Store the operating manual with the machine.
www.scheppach.com
GB | 43
Publicidad
