afx light MASTBAR-BAT Manual De Instrucciones página 3

UNPACKING INSTRUCTIONS
Immediately upon receipt of a fixture, carefully unpack the carton and check the contents to en-
sure that all parts are present and have arrived in good condition. If any parts appear to have been
damaged in transit or the carton itself shows signs of mishandling, notify the carrier immediately
and retain the packaging material for inspection. Retain the carton and all packing materials. In
the event that a fixture must be returned to the factory, it is important that the fixture is returned
in the original factory box and packaging.
EXPLANATION OF SYMBOLS ON THE SILKSCREEN
The triangle containing a lightning symbol is used to indicate whenever your health is at risk
(due to electrocution, for example).
An exclamation mark in a triangle indicates particular risks in handling or operating the ap-
pliance.
Class I protection: Connect only to an earthed mains outlet
The unit complies with UK standards
For indoor use only
Minimum distance between the appliance and other objects
0.5m
Do not stare into the light beam
DO NOT OPEN THE HOUSING
SHOCK HAZARD
Please read this manual carefully before operating this product.
SAFETY RECOMMENDATIONS
• Please read this manual carefully as it contains important information on the installation, use
and maintenance of this product.
• Please keep this manual for future reference. If you sell the unit to another user, ensure that they
also receive this manual.
• Always ensure that you are connecting to the correct voltage and that the voltage to which you
are connecting is not higher than that indicated on the bottom of the unit.
• This product is a Class I product and must only be connected to an earthed wall socket.
• This product is for indoor use only!
• To reduce the risk of fire or electric shock, do not expose the fixture to rain or moisture. Ensure
that there are no flammable materials near the unit during operation.
• The unit must be installed in a location with adequate ventilation and at least 20 inches (50 cm)
from adjacent surfaces. Ensure that ventilation slots are not blocked.
• The minimum distance from the part of the luminaire or lamp to the illuminated object is 0.5m.
• The maximum ambient temperature (Ta) is 40°C. Don't operate the fixture at higher tempera-
tures.
• The surface temperature of the fixture can reach 60°C. DO NOT TOUCH the enclosure with bare
hands during operation. Turn off the power and allow the fixture to cool for approximately 15
minutes before replacing or servicing.
• Do not operate the fixture continuously for more than 10 hours.
• In the event of a serious operating problem, stop using the unit immediately. Never attempt to
repair the unit yourself. Repairs performed by unqualified personnel may result in damage or
malfunction. Contact your nearest authorised service centre. Always use the same type of re-
placement parts.
• Ensure that the power cord is never pinched or damaged.
USER MANUAL
CAUTION
www.afx-light.com
3 EN