Descargar Imprimir esta página

Dometic DE 15F Instrucciones De Montaje Y Uso página 26

Nevera
Ocultar thumbs Ver también para DE 15F:

Publicidad

Idiomas disponibles

Idiomas disponibles

EN   DE 15F, DE 24F, EA 15F, EA 24B, EA 24D, EA 24F
No.
Explanation
3
Display
4
Setting buttons
EA 24D
No.
Explanation
1
On/off button
2
Light button
3
Display
4
Setting buttons
Alarm function
The device is equipped with an alarm function. The
alarm sounds when the temperature inside the device
has changed significantly from the set temperature or
the door of the device has been open for more than 60
seconds or has been opened frequently.
7 Installation
WARNING! Electrocution hazard
Ensure that electrical connections comply
with state and local codes.
Mounting the handles
Proceed as shown.
Fig. 
on page 5
Inserting the shelf supports
Proceed as shown.
Fig. 
on page 6
Inserting the shelves
Proceed as shown:
DE 15F, DE 24F:
EA 15F, EA 24F:
EA 24B:
24
Fig. 
on page 6
Fig. 
on page 7
Fig. 
on page 7
Selecting the installing location
WARNING! Risk of injury
Move the device with at least 2 people.
• The intended ambient temperature and the cli-
mate class can be found in the technical data (see
Technical
data) and on the data plate of the de-
vice.
• The ground must be level and sufficiently stable to
support the device when fully loaded.
• The device must be positioned so that the plug is
accessible.
• Note the information on the electrical connection
(chapter
Connecting the device to the power sup
ply).
• Do not install the device in an area with excessive
moisture.
• Remove all the inner and outer packaging material
before setting up the device.
Placing the device
NOTE
• Observe the device's dimensions
(Technical
(Fig. ) when installing the device.
• Ensure that the door can be opened
completely and is not blocked by other
objects.
Fig. 
on page 8
DE 15F, DE 24F, EA 15F, EA 24B, EA 24F
1.
Ensure that the door is locked when moving the de-
vice.
2. If necessary, tape the door with duct tape.
3. Position the device.
EA 24D only
1.
Fix the drawers with duct tape when moving the
device.
2. Attach the anti-tip brackets on the floor.
Fig. 
on page 9
3. Position the device.
data) and safety distances

Publicidad

loading