TELEPASS ETOLLK1TL Manual De Uso página 5

Status LED
The status LED lamp indicates the device's function
and warns of any faults during use and during setup.
On and
steady
(green)
Flashes
once
(green)
during
setup
-
(off)
On and
steady
(red)
Flashing
(red)
Flashing
three
(green)
times
when the
vehicle is
switched
off
Communication LED
The communication LED lamp indicates dialog with
the device and accompanies the voice messages.
Value confirmed
(green)
Voice message being read
(yellow)
Value refused
The value selected is not
(red)
allowed.
Select a permitted value.
bp and Aral Tollbox:
many c ou nt ries
o n e device
Device functioning
Power supply from
vehicle correct
Setup accepted
Power supply from
vehicle correct
Device is off
Device non
connected
Do not travel on toll
roads.
E-toll payment is not
active
Device fault
Do not travel on toll
roads.
Device non
functioning correctly
Power supply
disconnected or
device overheated
Check the "Fault
messages" section.
Device deactivated
Sound signals at transit detection
When entering into radio detection areas, the device
emits sound signals.
Transit recorded.
x 1
Transit recorded, yet the device is
x 2
signaling a fault.
Transit NOT recorded.
x 4
When entering into satellite detection
areas, the device does not emit sound
signals.
EN