BaByliss PRO POWERFX FX810 Manual página 3

OPERATION
This professional electromagnetic clipper is designed for professional use only.
This appliance is used on Alternating Current 120V AC (60Hz) only.
Blade Guard
Taper lever
Cleaning brush
ON/OFF switch
10-foot
Lubricating oil
Professional
Cable
FX810 IB-15249C.indd 5-6 FX810 IB-15249C.indd 5-6
Blade
Comb Attachment Comb Attachment
#.5 – 1/16" (1.5 mm) #1 – 1/8" (3 mm)
Comb Attachment
Comb Attachment
#1.5 – 3/16" (4.8 mm)
#2 – 1/4" (6 mm)
Tension
screw
Comb Attachment Comb Attachment
#3 – 3/8" (10 mm) #4 – 1/2" (13 mm)
Comb Attachment Comb Attachment
#5– 5/8" (16 mm) #6 – 3/4" (19 mm)
OPERATING INSTRUCTIONS
This appliance is used on Alternating Current 120V AC 60 hertz only. To reduce the
risk of electric shock, this appliance has a polarized plug (one blade is wider than
the other). As a safety feature, this plug will fit in the polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician to install the proper outlet. Do not change the plug in any
way. Do not attempt to defeat this safety feature.
Ensure the "I-ON/O-OFF" switch is in the OFF position. Remove the plastic guard
protecting the blade. Apply a drop of the provided lubricating oil across the blades;
wipe off any excess oil with a dry cloth. Plug the clipper into electrical outlet. Push
the "I-ON/O-OFF" switch to "I-ON" position. When finished cutting hair, remove hair
trimmings and debris from the blades using the provided cleaning brush. Wipe the
housing clean with a dry cloth. Before replacing blade guard, apply a few drops of
lubricating oil to the blades to prevent any rust from occurring; this last procedure
is important for the proper maintenance of the blades.
This quality haircutting instrument has been manufactured with extreme care. It
has been thoroughly tested and inspected before reaching the professional user.
As with all precision instruments, there may be a period of breaking in. If the speed
of the motor varies (as indicated by a change in sound or pitch), it is an indication of
a change in position of the clipper or a fluctuation in line voltage. When the clipper
is lubricated in accordance with instructions, it will deliver ample power and speed
for professional haircutting requirements.
VERY IMPORTANT: Blades must be cleaned and oiled on a
regular basis for proper functioning. Failure to clean and
oil the blades regularly will void the warranty.
2021/6/10 12:30 PM 2021/6/10 12:30 PM