Grip Rite GRTFR83 Manual Del Operador página 11

ADJUSTING NAIL DRIVE
1. Disconnect tool from air supply
using quick-connect coupling.
2. Turn adjustment dial (D) backward
toward magazine to increase nail
drive, or forward toward front of
tool to decrease nail drive, as
shown by nail symbols on tool.
3. Connect tool to air supply, and
drive nails to check for correct
depth of drive.
4. Make depth of drive adjustments
as needed to maintain consistent
nail driving.
SELECTING TRIGGER
OPERATION
1. Disconnect tool from air supply
using quick-connect coupling.
2a. BUMP FIRE OPERATION
Slide the selector button (E) on the
trigger to the forward position.
2b. SEQUENTIAL FIRE OPERATION
Slide the selector button (E) on the
trigger to the rear position.
3. Connect air tool to air supply at
quick-connect coupling.
11
OPERATION