Orbegozo SFW 7040 Manual De Instrucciones página 13

SFW 7040
DESCRIPTION
1. Front grille
2. Blade adjustment nut
3. Blades
4. Rear adjustment nut
5. Rear grille
6. Grid fastening
7. Motor shaft
8. Engine
9. fan body
10. control Panel
11. Screw
12. Power cord
13. Inner tube
14. Height adjustment nut
15. outer tube
16. Adapter to base
17. Base
18. Remote control
19. Desktop adapter
INSTALLATION INSTRUCTION
- BASE, POLE AND BODY (STAND MOUNT)
A) Place the base (17) on the ground.
B) Insert the outer tube (15) into the base using its adapter
(16).
C) Loosen the height adjustment nut (14) to adjust the inner
tube (13) to the desired height. Now, tighten the nut (14)
again so that it remains fixed.
D) Then connect the fan body (9) to the inner tube (13). Then
tighten the screw (11) at the top.
- BASE AND BODY (MONTAJE DE SOBREMESA)
A) Place the base (17) on the ground.
B) Insert the desktop adapter (19) into the base.
C) Then connect the fan body (9) to the desktop adapter
(19). Then tighten the screw (11) at the top.
13