Orbegozo SFW 7040 Manual De Instrucciones página 14

SFW 7040
- BLADE AND GRILLS
A) First remove the plastic from the motor shaft (7).
B) Guide the rear grille (5) on the motor shaft (7) to the front of the motor (8). Make sure that the area
where the locking and unlocking signs appear on the rear grille (5) are facing up and that all the
elements together with the motor (8) fit perfectly.
C) Then secure the rear grille (5) with the rear adjustment nut (4). To do this, securely attach the nut (4) to
the motor (8) by tightening clockwise.
D) Guide the fan blades (3) along the motor shaft (7) toward the nut (4). Carefully turn the fan blades (3)
until they fit perfectly with the nut (4).
E) Now place the blade adjustment nut (2) on the motor shaft (7). It is fixed by tightening the nut (2)
counterclockwise.
F) Then mount the front grille (1) against the rear grille (5) matching the marks on the top, and connect
both parts using the hooks on the front grille (1) and the slots on the rear grille (5). Carefully pull the
locking pin out and rotate the front grille (1) clockwise to the locked position until it clicks into place.
NOTE: To remove the front grill, gently pull the locking pin outward while rotating the front grill
counterclockwise.
1. Snap and align
FUNCIONAMIENTO
Pull the pin
2. Rotate the front grill 3. Block
14