Publicidad
Idiomas disponibles
Idiomas disponibles
16. "UNIVERSAL INTERCOM" INTERCOM
The N-Com B902 system can be connected via Bluetooth to intercom systems of other brands, thanks
to the UNIVERSAL INTERCOM function
16.1.
Pairing up the UNIVERSAL INTERCOM
The N-Com system can be paired up to the other intercom (from now on referred to as Intercom B)
as if it was a mobile phone.
•
Make sure the B902 is turned off.
•
Put the B902 system in the "Pairing up" menu: press the "ON" key and keep it pressed for 4
seconds, until you hear the voice announcement "
•
Press the "" key until you reach the option "
•
Put intercom B in the mobile phone pairing up mode. Important: If the intercom allows
management of two mobile phones, put it in pair up mode of the second mobile phone. By doing
so, it will be possible to maintain the connection to your own mobile phone even during intercom
communication (refer to the Intercom B manual).
•
On the B902 system, press the control related to the "memory position" where you wish to store
intercom B.
Pairing up of CHANNEL 1
Pairing up of CHANNEL 2
Pairing up of CHANNEL 3
N.B.: In case there are already other intercom systems stored in the memory of the B902 system, check
on the EASYSET N-Com App which channels are still available. If a channel that is already used is
selected during pair up, the new intercom system will overwrite the one previously stored on that
channel.
•
After a few seconds, Intercom B will emit the confirmation beep.
16.2.
Universal Intercom Function
To turn on and off the audio between two helmets, proceed as follows:
From the N-Com B902 system:
Connect or disconnect Intercom B as you would for a regular N-Com intercom (chapter 15).
Intercom B may receive a dialling tone that must be answered with a phone reply command.
From intercom B
To enable the intercom connection, press the "
To disable the intercom connection, press the "
N.B.: Some systems are not able to handle the activation / deactivation of the intercom connection. In
this case, operate from the B902 system.
2
Except for Bluetooth kit and Bluetooth kit2, which are not compatible
2
.
Pairing up Menu
Universal intercom pairing
Briefly press key "n".
Press 2 times key "n".
Press 3 times key "n".
Voice Call
" or "
Hang up
" or "
".
".
Last number redial
" command.
Reject phone call
" command.
25
Publicidad
