Publicidad
Idiomas disponibles
Idiomas disponibles
2 3/4" (70mm)
Drill 3 pilot holes using a 7/32" (5.5mm) diameter drill bit. Make sure the depth is not less than 2 3/4"
(70mm). Mount the Arm Assembly / Wall Plate [02] on the wall using the Lag Screws [A1]. Tighten
the Lag Screws only until they are pulled firmly against the Wall Plate (DO NOT overtighten).
Option B
Pencil
(NOT Included)
Position the Wall Plate Template [03] at your desired height. Level the template and mark the holes.
Drill 3 pilot holes using a 3/8" (10mm) diameter drill bit. Make sure the depth is not less than 3"
(75mm). Never drill into the mortar between blocks or bricks.
Electric Drill
(NOT Included)
2 3/4" (70mm)
ø7/32" (5.5mm)
3" (75mm)
03
1/2" (13mm)
Socket Wrench
(NOT Included)
02
07
11
A1
A1
A1
A1
A1
A1
Electric Drill
(NOT Included)
3" (75mm)
ø3/8" (10mm)
3/8"
3/8"
(10mm)
(10mm)
Publicidad
