Publicidad
Idiomas disponibles
Idiomas disponibles
Hammer
(NOT Included)
A2
A2
A2
A2
A2
A2
Use a hammer to tap the Anchors [A2] into the drilled holes. Ensure the anchors are seated flush with
the concrete or brick surface. Mount the Arm Assembly / Wall Plate [02] on the wall using the Lag
Screws [A1] and Anchors [A2]. Tighten the Lag Screws [A1] only until they are pulled firmly against
the Wall Plate (DO NOT overtighten).
Supplied Parts and Hardware for Step 3
Large Wall Panel Cover
Step 3 Mount the Wall Panel Cover on the Wall Plate
02
After firmly installing the Wall Plate [02] onto the wall, it is necessary to install two Wall Panel Cover
[04] & [05] of different sizes onto the Wall Plate.
A2
A2
04
x 2
04
05
04
02
Small Wall Panel Cover
02
12
1/2" (13mm)
Socket Wrench
(NOT Included)
A1
A1
A1
A1
A1
A1
05
x 1
Publicidad
