Publicidad
Idiomas disponibles
Idiomas disponibles
• Before disassembling, cleaning, or when the shaker is not in use, disconnect the power
supply.
• Before cleaning, be sure to turn off the power switch and unplug the power cord. Wait for
the machine to cool down to avoid burns from residual heat. Then proceed with the clean-
ing with caution.
• When pouring food into the jar or cleaning the interior, be sure to pay attention to the sharp
blades to avoid accidental scratches or cuts.
• Do not rinse or immerse the device directly in water. In case it is not easy to clean, you can
use a neutral detergent to clean it, and then dry it with a dry cloth.
• The body and the lid of the cup can be cleaned with a neutral detergent, avoiding the use
of abrasive or chemical cleaning products. In case of sticky food, it is recommended to use
the brush for a more effective cleaning. Be sure to rinse well after cleaning.
• For effective cleaning, it is recommended to pour warm water with dish soap into the cup.
Then turn on the power and select the [WASH] function. Let the product work for a few
seconds and then drain the water. Finally, rinse the cup with clean water.
• If the hot plate is not clean, you can use the brush to apply a small amount of white vinegar.
Gently rub the surface of the plate, then wipe clean.
• It is important to note that utensils should not be submerged in water. However, the exterior
of the machine can be cleaned with a damp cloth. Avoid immersing the machine in liquids to
avoid the risk of a short circuit in the electrical part due to the ingress of water.
• Avoid using chemicals, such as alcohol, to clean the product.
• Never use excessively hard steel wool or brushes to brush the surface of the product.
• It is recommended to immediately wash the parts that come into contact with food after
each use and dry them separately to avoid color staining caused mainly by fruit juices.
• Avoid exposing the products, power cords, and packaging accessories to direct sunlight.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous
substances in electric and electronic equipment as well as their waste disposal. The symbol with the
crossed dustbin shown on the package indicates that the product at the end of its service life shall be
collected as separate waste. Therefore, any products that have reached the end of their useful life must
be given to waste disposal centres specialising in separate collection of waste electrical and electronic
equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one
basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible nega-
tive effects on the environment and health and optimises the recycling and reuse of components making
up the apparatus. Abusive disposal of the product by the user involves application of the administrative
sanctions according to the laws.
E NGL I SH
12
CLEANING AND MAINTENANCE
Publicidad
