cecotec Bongo M20 Serie Manual De Instrucciones página 66

ENGLISH
Hold the handlebar stem, turn it counterclockwise to open the safety hook and lift the
1.
quick release lever.
2. Align the bell and hook and engage. When opened, unhook the bell lever from the
mudguard hook.
3. Unfold the handlebar stem, lock the quick release lever and rotate the handle bar
clockwise to close the safety hook.
Transport
Hold the handlebar stem with one or both hands.
Adjusting the handlebar
Fig. 28
Inner hexagon nut
a.
b. Hexagonal bolt
Hexagon nut
c.
Prolonged use of the scooter can cause the screws to loosen and the handlebar stem to
become unstable. If you notice that the handlebar stem wobbles when riding, follow the steps
below.
Tools
I: 8-10-mm wrench
II: 4 mm Allen key
Note: These tools must be in the user's possession.
Steps:
With the scooter folded, use tool I to loosen "c" (clockwise).
1.
Use tool I to loosen "b" (clockwise).
2.
3. Use tool II to adjust "a" (clockwise) to the proper position, and use tool I to tighten "b"
(counterclockwise).
4. Lift the handlebar, close the quick release lever and turn the handlebar clockwise to close
the safety hook.
Shake the handlebar stem to see if the problem has been resolved. If not, repeat steps 2
5.
and 3. If resolved, continue to step 6.
6. Fold the scooter again and use tool I to tighten "c" (counterclockwise).
* Step 6 is mandatory.
5. CLEANING AND MAINTENANCE
- Make sure the product is not plugged in the power supply or on before cleaning or
maintenance.
66