Descargar Imprimir esta página

Beurer LB 55 Instrucciones De Uso página 22

Humidificador de aire
Ocultar thumbs Ver también para LB 55:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 37
Clean individual parts
• Wash the pad [4] with clean water. You can remove stubborn limescale by first putting the pad
[4] in a weak vinegar solution. If the pad [4] is hard and rigid, it must be replaced (see next secti-
on 3 'Changing the pad').
• Clean the following individual parts of the appliance thoroughly with washing-up liquid and warm
water. Any residue from cleaning agents should be thoroughly removed.
• Tank [8] and tank catch [9]. When cleaning the tank catch [9], do not damage the valve.
• Steam tower [3] and steam nozzle [1].
• Cover [2].
Changing the pad
Note
• Pads are obtainable from the service address or from the authorised dealer.
• Remove the worn pad [4] from the hotwater chamber. Dispose of the pad in the household
refuse.
• If there is any water left in the appliance, pour it out.
• Use a new pad [4].
• Wash out the new pad [4] with clean water and put in the hotwater chamber.
Descaling the appliance
Descale the air humidifier
Note
• Never try to remove any limescale deposit with pointed or sharp objects. This might damage the
air humidifier or cause it to leak.
• Use either a citric acid solution (30 g pure citric acid powder dissolved in 1 l water) or a vinegar
solution (household vinegar with 5% acid content mixed with water in a ratio of 1:2) as a desca-
ling solution.
• Fill the hotwater chamber up to the brim with descaling solution.
• Leave the descaling solution to work until the limescale has dissolved.
• Pour away the descaling solution. Tip the appliance sideways to remove the descaling solution.
• Rinse out the appliance thoroughly with clean water.
• Repeat this procedure if necessary.
After cleaning and descaling
Insert the pad
• Put the cleaned pad or replacement pad [4] into the hotwater chamber.
Assemble the appliance
• Put the steam tower [3] back into the air humidifier. Press the steam nozzle [1] into the opening
at the top of the steam tower [3].
• Screw the tank catch [9] onto the water tank [8]. Place the water tank [8] in the air humidifier.
• Place the cover [2] on top of the air humidifier.
22

Publicidad

loading