unit is operating.
Preparing the device for operation
Unpack the device. Wipe its casing with a cloth soaked in a little water and wipe
it dry. Disconnect the tank (see fig. f). Rinse and dry the tank and nozzles as
described in "Maintenance" section, clause "Daily Care".
Charging the device
WARNING! The power adapter is not included in the package. You can use the
AC adapter from a smartphone, tablet or other device as long as it provides 5 V ,
1.0 A power parameters (DC).
Connect the device to the mains as shown in figure d. Status of the battery
charge indicator (6) during charging:
the device is charging – the indicator blinks red;
the device is fully charged – the indicator lights green.
When charging is completed, unplug the device, disconnect the cable (12) and
close the USB port (8) by firmly inserting the blind-plug. Charge the device for
at least 12 hours before using it for the first time.
Status of the battery charge indicator (6) in the operating mode:
the charge level is less than 5 % – the indicator blinks red rapidly, the device
does not turn on;
the charge level is 5–10 % – the indicator blinks red slowly;
the charge level is 10–100 % – the indicator is off.
When the device is charged, place one of the replaceable nozzles (13–16) on the
casing by pushing it until it clicks. The nozzle can spin 360°.
Purpose of the irrigator nozzles (figure c):
standard nozzle for cleaning food debris, plaque (13);
tongue cleaner nozzle (14);
orthodontic nozzle for braces, dentures (15);
nozzle for cleaning of the periodontal pockets (16).
aeno.com/documents
13