Descargar Imprimir esta página

Midas AS 80 Manual De Instrucciones página 21

Publicidad

40
AS 80
AS 80 Example Set-ups
AS 80 Example Set-ups
Redundant HMAC connection
In this example the HD96-24 Console is located at the front of house position (FOH) and the AS 80 is located at the stage position with the DN9680. This allows either
2 Multi-Mode Fibre's or two Shielded Cat5e STP cables to be used to connect the FOH console to the AS 80 giving redundancy of the HMAC. Hypermac redundancy must
be turned on in the HD96-24 console in order for this set-up to function correctly.
Note: When using redundant mode, the cables must be the same type, either 2 Fibre or 2 Shielded Cat5e connections. You cannot use 1 fibre and 1 Shielded Cat5e to
achieve redundancy.
2 x connections via HMAC
Multi-Mode Fibre (up to 500m)
or CAT5E STP (up to 100m)
Connection via HMAC
Multi-Mode Fibre (up to 500m)
AS 80 & DN9680 located at Stage position
or CAT5E STP (up to 100m)
DUAL Redundant HMAC connection allowing 16 AES50 ports at stage
In this example the HD96-24 Console is located at the front of house position (FOH) with two AS 80's. This allows either 2 Multi-Mode Fibre's or two Shielded Cat5e
STP cables to connect the FOH console to the 2 local AS 80. The FOH AS 80's connect to the stage AS 80's with 2 Multi-Mode Fibre's or two Shielded Cat5e STP cables
giving redundancy of the HMAC. At the stage position the AS 80's are located with a DN9680 attached to each in order to connect to the stage I/O. This gives a possible
16 AES50 ports (up to 24 inputs and 24 outputs per port) with a pool of a possible 384 inputs depending on connected I/O.
1 connections from each HMAC
Multi-Mode Fibre Port (up to 500m)
or each CAT5E STP (up to 100m)
2 x connections via HMAC
Multi-Mode Fibre (up to 500m)
or CAT5E STP (up to 100m)
Connection via HMAC
Multi-Mode Fibre (up to 500m)
or CAT5E STP (up to 100m)
2 x DN9680 located at Stage position
RX
MADI
TX
KT-AES50
TX
RX
HD96-24 surface
located at FOH position
RX
MADI
TX
KT-AES50
TX
RX
2 x AS 80 local to
console at FOH position
2 x AS 80 located at Stage position
AS 80 Ejemplos De Configuración
Conexión HMAC redundante
En este ejemplo usamos la consola HD96-24 situada en la posición frontal al escenario (FOH) con el AS 80 ubicado en el propio escenario con la DN9680. Esto le permite
usar o bien dos cables de fibra multimodo o dos Cat5e blindado STP para conectar la consola FOH al AS 80 lo que le ofrece redundancia HMAC. En la consola HD96-24
deberá activar la redundancia Hypermac para que esta configuración funcione correctamente.
Nota: Cuando use el modo redundante, los cables deberán ser del mismo tipo, tanto si son 2 conexiones de fibra o 2 Cat5e blindado. No puede usar 1 conexión de fibra
y 1 Cat5e blindado para conseguir redundancia.
2 x connections via HMAC
Multi-Mode Fibre (up to 500m)
or CAT5E STP (up to 100m)
Connection via HMAC
Multi-Mode Fibre (up to 500m)
AS 80 & DN9680 located at Stage position
or CAT5E STP (up to 100m)
DOBLE conexión HMAC redundante para disponer de 16 puertos AES50 sobre el escenario
En este ejemplo la consola HD96-24 está situada en la posición frontal al escenario (FOH) con dos AS 80. Esto le permite conectar dos cables de fibra multimodo o dos
cables Cat5e blindado STP para conectar la consola FOH a los dos AS 80 locales. Los AS 80 FOH se conectan a los AS 80 de escenario con dos cables de fibra multimodo
o con dos cables Cat5e blindado STP para darle redundancia HMAC. En la posición de escenario, los AS 80 están con un DN9680 conectado a cada uno para la conexión
a la E/S de escenario. Esto le ofrece hasta 16 posibles puertos AES50 (hasta 24 entradas y 24 salidas por puerto) con un esquema de hasta 384 posibles entradas
dependiendo de las E/S conectadas.
1 connections from each HMAC
Multi-Mode Fibre Port (up to 500m)
or each CAT5E STP (up to 100m)
2 x connections via HMAC
Multi-Mode Fibre (up to 500m)
or CAT5E STP (up to 100m)
Connection via HMAC
Multi-Mode Fibre (up to 500m)
or CAT5E STP (up to 100m)
2 x DN9680 located at Stage position
Quick Start Guide
RX
MADI
TX
KT-AES50
TX
RX
HD96-24 surface
located at FOH position
RX
MADI
TX
KT-AES50
TX
RX
2 x AS 80 local to
console at FOH position
2 x AS 80 located at Stage position
41

Publicidad

loading