Ashdown ROOTMASTER EVO III Serie Guia Del Usuario página 6

ROOTMASTER EVO III ROOTMASTER EVO III
USER GUIDE USER GUIDE
FS-2 OUTPUT
The FS-2 Output is for use with a double latching foot-swtich, this controls
the Sub Harmonics and also the Drive for ease of access (foot-switch sold
separately).
HEADPHONE OUTPUT
There is a 32 ohm headphone output on the rear panel for use in silent
REAR PANEL FOR BOTH:
practice.
SPEAKER OUTPUTS
There are two speakon out sockets located on the rear of the amp for use
with appropriate cabinets. Min load of 4 ohms. All speaker connections
used must be of the speakon type and fully insulated. These amplifiers
operate in full Bridge mode which means that both terminals are live
at ALL times and must not be allowed to come into contact with the
amplifier case or connected to anything other than a stand alone speaker
cabinet!
MAINS
For use with the supplied IEC mains connector. Mains fuse is located
beneath socket, please check rear of model for specific fuse ratings.
Everything possible has been done to make these reliable, minimum
service, high quality, long lasting powerful bass amplifiers.
We know you will appreciate the effort that has been put into the design
and manufacture of this unit and you will be rewarded in your choice of
bass amplifier by long life and reliability.