Descargar Imprimir esta página

Beta 1467LF/2 Instrucciones página 6

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 15
INSTRUCTIONS FOR USE
Working safely with this machine is
possible only when the operating
and safety information are read
completely and the instructions
contained therein are strictly follo-
wed.
Before each use of the machine,
check the cable and plug. lf damage
is detected, do not use the machine.
Have repairs performed only by a qua-
Never open the machine yourself.
Operating Controls
1 Filler hose
2 Pressure gauge
3 Pressure regulator
4 Start button (START)
5 Mains switch (ON/OFF)
7 Mains cable
8 Suction hoses
Use as Intended
The device is intended exclusively for the replenishing and
vehicie. Any other or additional usage is not in accordance
with the intended purpose.
Functional Principle
emerges.
as opposed to common systems and the water absorption by
6
For your Safety
• The machine must not be damp and must also not be
operated in damp surroundings.
Therefore, avoid all contact with this substance. For skin
this applies also for vehicle paint and clothing.
• Before any work on the machine itself, pull the mains plug.
• Insert the mains plug only when the machine is switched
off.
• Do not make any constructional changes to the unit.
Observe the mains voltage:
The voltage of the power source must agree with the
value given on the nameplate of the machine. Machines
designated for 230 V can also be operated with 220 V.
• The
coverage of an kind exists.
would destroy the equipment. No claims for quarante
compensation can be made in this case.
provided.
• Unscrew the cover of the canister and, from the rubber
• Dampen the suction hoses
slide through the rubber cone selected.
• Then insert ehe suction hoses
rests lightly on the bottom of the container. Finally,
Initial Operation
1
to compressed air which
8
8
into the canister until it
EN

Publicidad

loading