DYU C6 PRO Manual Del Usuario página 8

EN FR DE
1.
When battery stays inside the frame, ensure normal
connection of the battery first.
2. Connect the charging cable with the charger, and then to
the charging port on the frame.
ATTENTION:
1. Please use the charger from the package.
2. Please keep the charging port cover closed when not charging.
3. Do not switch on the battery while charging.
4. To preserve battery life, always charge the battery fully.
5. Unplug the charger immediately when the indicator light turns
green.
Do not disassemble the battery.
6.
1.6 Tires
Before every ride, check the tires for proper tire pressure.
Inflate the tires
DYU SMART ELECTRIC BIKE C6 PRO INSTRUCTION
ES IT
3. Plug the charger to the mains to start charging. When
the charging indicator light is red, the battery is
charging. When the light turns green, the charge is
complete. A full charge takes 5-6 hours. Disconnect the
charger after charging.
4. Close the charging port cover.
CHARGING PORT WITH COVER
CHARGING
INDICATOR LIGHT
CHARGING INDICATOR LIGHT ON THE CHARGER
CHARGING
CHARGING COMPLETE
To charge the battery away from the frame, remove the
battery first.
1.
Unscrew the valve cap counterclockwise.
2. Clip the pump on the valve, and start pumping. Each push should
be even.
3. Stop pumping when there is enough tire pressure, and detach the
pump.
4. Screw the valve cap back clockwise
2. Functions
Light Switch
Brake Lever
Horn
Grip Cover
2.1 Kickstand
1. Kick the kickstand backward with your foot, and it shall lift up to a position parallel to the ground.
2. Gently press down the kickstand towards the ground with your foot, and it shall support the eBike against the ground.
Note: Please be sure to swing the kickstand up before riding.
Shifter
Brake Lever
Power
Grip
Button
Cover
010 011