Aiper Scuba E1 Manual Del Usuario página 12

b. Once turned on, the device will rotate its water pump for 1s every 10s, 3
times in total, to check if it has been put into the pool. If the device fails
to detect water during this process, it will automatically shut down.
The device will start cleaning soon after reaching the pool floor.
c. When the battery level is low, the device will automatically dock by
the pool and stop cleaning.
d. Lift the device from the pool floor with a hook to prevent getting wet.
Users can connect the hook to any standard pool cleaning rod (not
included) to extend the reach of the hook.
e. Hook the device's handle and lift the device out of the water.
9