Publicidad
Idiomas disponibles
Idiomas disponibles
Sleep wind mode:
The Sleep light indicator
will run into the Min normal wind and the buzzer will be turned off immediately.
5 seconds after the cessation of the manual operation, the light will dim and
then go out. If you want to change the wind speed, just Press
remote controller or press
choose the wind speed ranging from 1-3. In this mode, the wind speed will be
reduced by one level every half an hour, and the level 1 wind speed will be
maintained until it is turned off.
3. Oscillation
Press this
button on the remote controller or keep pressing
the control panel for 3 seconds, the fan will oscillate from the left to the right
automatically. Press
button on the control panel for 3 seconds again to stop oscillate.
4. Timer
Press the
on the control panel or press
you want, every push will add 1H. The timer is from 1-15 hours.
5. Wind Speed
Press
on the remote controller or press the
wind speed, the wind speed ranging from 1-3.
Part 7 Maintenance and Storage
1. Always remove the plug from the socket-outlet and allow the fan to stop
before cleaning it.
2. Clean the external surfaces of the fan with a soft damp cloth (not dripping
wet cloth).
WARNING:
Do not immerse the fan into water.
Do not use any cleaning chemicals such as detergent and abrasive. Do
not allow the interior to get wet as this could cause dangerous
consequences.
3. When the unit is not in use, make sure that it is unplugged from the wall
socket. To store the fan, you may pack it in the original carton and store it in
a cool and dry place.
4. In case of malfunction or doubt, do not try to repair the fan by yourself;
otherwise it may result in a fire hazard or electric shock.
will display when this mode is selected, the fan
on the control panel to choose wind speed to
button on the remote controller or keep pressing
on remote to select the timer
on control panel to choose
on the
button on
Publicidad
