Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO SET UP FRESHWATER
IQ
®
NOTE: You will need a Phillips head screwdriver (not included).
1
Turn the power to your spa
off (reference Spa Owner's
Manual for instructions).
Rotate the FreshWater IQ
cap counterclockwise and
lift up to remove.
2
Rotate the FreshWater IQ
plug counterclockwise to
unlock and lift out.
3
Using the Phillips head
screwdriver, remove
the screw and separate
the plug from the handle.
IMPORTANT: Retain screw
and ensure it does not
fall into the FreshWater
IQ housing. Refer to the
FreshWater IQ Owner's
Manual for information on
replacement screws.
4
Fit the pre-assembled
controller and sensor
to the handle and
replace the screw.
Remove protective film.
Publicidad
