Neriox 115159 Instrucciones De Uso página 3

3
115159
EXTERNAL DIGITAL MICROMETER
Operating instructions
1
5
Legend:
1. Anvil
2. Spindle
3. Clamping lever
4. Main body
5. Insulator
6. ON/OFF – ZERO key
7. ABS - in/mm key
8. DATA key
9. Digital display
10. Data output
11. Thimble
12. Ratchet
Safety-relevant information
• Use micrometer at permissible operating temperature only
• Protect micrometer against mechanical damage
• Properly dispose of micrometer
Repair
If the instrument is defective, please contact our
service centre → Servicecenter@brw.ch
Brütsch/Rüegger Werkzeuge AG, Heinrich Stutz-Strasse 20, Postfach, CH-8902 Urdorf, Tel. +41 44 736 63 63, Fax +41 44 736 63 00, www.neriox.tools, sales@brw.ch
2 3
6
4
7 8
Specification
Measurement ranges: 0...25 / 25...50 / 50...75 / 75...100
Resolution:0.001
Measuring force: 5...10 N
Operating temperature: 0...40°
Energy: Lithium battery CR2031 / 3.0 V
Properties
ZERO (resetting display to zero)
ABS (absolute and INC measuring mode conversion)
mm/inch conversion
Automatic Power OFF
Operation:
Activation/Deactivation – briefly press ON/OFF key
Resetting display to zero – press and hold ZERO key (not possible in INC mode)
Conversion to Absolute mode (INC) – briefly press ABS key
mm/inch conversion – press and hold in/mm key
Instructions for care:
A soft cloth can be used for cleaning the surfaces.
Do not use petrol, acetone or isopropanol for cleaning under any circumstances.
Remove the battery if the instrument is not going to be used for an extended period.
11 12
10
9