Makita DUP361 Manual De Instrucciones página 8

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Max. cutting capacity
Overall length (shears part)
Rated voltage
Net weight (shears part)
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight, the shears part only, according to EPTA-Procedure 01/2014
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
WARNING:
Do not use a corded power supply such as battery adapter or portable power pack with
this tool. Wearing more than one harness at a time makes it difficult to operate and release the tool, and may
cause an injury.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Do not expose to moisture.
Do not expose to rain.
DANGER - Keep hands away from blade.
Danger; be aware of thrown objects.
Keep bystanders away.
DUP361
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH / DC18WC
Only for EU countries
Ni-MH
Due to the presence of hazardous com-
Li-ion
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household
waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and on accumulators and batteries
and waste accumulators and batteries,
as well as their adaptation to national law,
waste electrical equipment, batteries and
accumulators should be stored separately
and delivered to a separate collection point
for municipal waste, operating in accor-
dance with the regulations on environmen-
tal protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.
Intended use
The tool is intended for pruning twigs or branches.
8 ENGLISH
DUP362
33 mm
305 mm
D.C.36 V
0.77 - 0.82 kg