Suzuki 39100-25810 Instrucciones Para El Montaje página 6

6/7
4. Connect the USB Socket ①
and the Controller ② .
Route the lead wire along
the headlamp cover brace (F)
and fix it by using the Clamp
③ as shown.
Cut off the excess part of the
Clamps ③ which were used
in step 2 and 4.
Check that the tip of the
Clamp ③ isn't in contact
with surrounding parts.
5. Install the removed motorcy-
cle parts in the reverse order
of removal.
GENUINE SUZUKI ACCESSORIES
(F)
③