Kicker KPX Serie Manual Del Propietário página 26

INPUT
AMP2 AMP1
FADER LEVEL
Fader Switch: Turn the fader switch ON
if you are running two sets of inputs (front
and rear for example) to the amplifier. Leave
the fader switch OFF if you want to drive all
channels from a single stereo input.
Input Level: Choose whether to receive a
HI or LO-level signal from your source unit.
HI-PASS: Use the HI-PASS switches of
the amplifier to set the internal crossover.
Choose a cutoff of 60Hz, 80Hz, 120Hz,
or OFF depending on the configuration of
switches.
English 26