Publicidad
Idiomas disponibles
Idiomas disponibles
be as close as possible to the battery, and
no further than 18" (45cm) of the battery,
and in-line with the harness' power cable,
which is connected to your KPX Amplifier.
Make sure the power wire is routed so that
it will not be damaged, crimped, or shorted.
If you ever need to remove the amplifier
from the vehicle after it has been installed,
the ground wire should be the last wire
disconnected from the amplifier; just the
opposite as when you installed it.
For multiple amplifier installations where
≤24"
(60cm)
bare-metal
chassis ground
English
fuse
remote turn-on
(see page 10)
≤18"
(45cm)
12V
battery
7
Publicidad
