SEAT AND SEATPOST
Bicycles come equipped with either a fixed-bolt seatpost collar or a quick-
release (over-center cam) seatpost collar. The seatpost collar holds the seatpost
in place and prevents it from moving down or rotating while you are riding.
FIXED-BOLT SEATPOST COLLAR
Make sure you install the correct size seatpost collar for your seatpost
measurement (see the table below).
MODEL
Stigmata, Highball
Jackal, V10
All other models
SEAT HEIGHT
How to determine the optimal seat height for your body size:
1. Sit on the seat and at the same time, lean against a wall.
2. Turn the foot pedal on the opposite side of the wall to its lowest
point.
3. Place your heel on the pedal. Your leg should be fully extended.
If your leg is not fully extended when your heel is on the pedal,
raise the seat. Lower the seat if you cannot reach the pedal.
SEATPOST MINIMUM INSERTION
The seatpost has a minimum insertion mark that must always remain
below the top of the seat tube. There must be a minimum of 3.15 inches
(80 mm) of the seatpost installed into the frame.
16
SEATPOST COLLAR DIAMETER
31.8 mm
34.9 mm
36.4 mm
QUICK RELEASE SEATPOST COLLAR
SEATPOST DIAMETER
27.2 mm
30.9 mm
31.6 mm
FULLY EXTENDED LEG
MINIMUM INSERTION MARK