Clarke FOCUS II Micro Rider Instrucciones De Uso página 18

ENGLISH
Solution/clean water tank illing
NOTE
If the machine is equipped with Chemical Mixing System (optional) the tank must be illed with clean water, otherwise the
tank must be illed with solution.
CAUTION!
Use only low-foam and non-lammable detergents, intended for automatic scrubber applications.
WARNING!
When using loor cleaning detergents, follow the instructions on the labels of the detergent bottles.
To handle loor cleaning detergents, wear suitable gloves and protections.
Open the iller neck (23).
1.
2. (For machines without Chemical Mixing System)
Fill the tank (22) with a solution suitable for the work to be performed.
Do not ill the tank (22) completely, leave a few inches from the top of the iller neck (23).
Always follow the dilution instructions on the label of the chemical product used to prepare the solution.
The solution temperature must not exceed 104°F (40°C).
(For machines with Chemical Mixing System)
Fill the tank (22) with clean water.
Do not ill the tank (22) completely, leave a few inches from the top of the iller neck (23).
The water temperature must not exceed 104°F (40°C).
Detergent tank replacement (for machines with Chemical Mixing System)
1. Open the recovery tank cover (20) and check that the recovery tank (19) is empty, otherwise empty it with the drain hose (24).
2. Close the recovery tank cover (20).
3. Carefully lift the recovery tank assembly (19) from left side.
4. Uncap the detergent tank (42).
5. Remove the empty container and replace it with a new one.
6. Insert the hose properly and screw down the cap on the detergent tank.
NOTE
If the detergent tank is empty (in case of new system, system emptied for cleaning, etc.), in order to ill the hose quickly,
it may be useful to drain the Chemical Mixing System once or several times (see the procedure in Maintenance chapter).
Driver's position adjustment
1. Using the lever (73), adjust the height of the steering wheel (1) to reach a comfortable position.
16
INSTRUCTIONS FOR USE
FOCUS II Micro Rider - 9099236000
7/11