Clatronic PM 3787 Manual De Instrucciones página 9

Switching On / Off
• Always set the temperature control (10) to the "MIN"
position before plugging in or unplugging the mains plug.
• The red indicator light (9) displays the heating process.
Pizza Stone
The pizza stone can be used on both sides. To change
sides, first remove all food residue from the side of the
stone. Once the stone is cleaned, turn it over. Place it back
on the base.
Before First Use
1. Clean the appliance as described under "Cleaning".
2. Insert the pizza stone.
3. Close the appliance.
4. Operate the appliance with the lid closed for approx.
10 minutes without pizza. Set the temperature control
to "MAX" and the timer to 10 minutes. Slight smoke
development is normal. Make sure there is sufficient
ventilation.
5. After the time has elapsed, unplug the appliance from
the mains.
6. Let the appliance cool down completely.
Your appliance is now ready for use.
WARNING:
• Always unplug the appliance from the mains and let it cool down
before cleaning.
• Do not immerse the appliance in water! It could cause an elec-
tric shock or fire.
CAUTION:
• Do not use a wire brush or other abrasive objects.
• Do not use any sharp or abrasive cleaning agents.
Pizza Stone
• Never immerse the pizza stone in water!
• Remove food residues with the pizza lifters and a paper
towel. You can remove stubborn residues with a dish
brush.
• Wipe the stone with a damp cloth. Let it dry completely
before using it again.
PM3787_IM
WARNING: Danger of Scalding!
Watch out for the escaping steam. Use the handles (3).
1. Insert the pizza stone.
2. Insert the mains plug into the socket.
3. Set the temperature control to "MAX" and the timer to
10 minutes. The heating time is approx. 10 minutes.
4. The indicator light goes out when the set temperature is
reached.
5. Open the appliance with the handles on the lid.
6. Place the topped pizza on the pizza stone.
7. Slowly close the lid.
8. The average baking time of a pizza is 15 minutes,
depending on the thickness of the pizza dough and
toppings. When your pizza is done baking, open the
appliance again with the handles on the lid.
9. Remove the pizza with the pizza lifters provided.
End Operation
1. Turn the temperature control knob to "MIN" when the
timer is set to "0".
2. Pull the mains plug out of the socket.
3. Maintain until the appliance has cooled down.
4. Clean the appliance as described under "Cleaning".
Cleaning
Viewing Window
• The viewing window darkens with prolonged use due to
cooking fumes.
• Clean the viewing window with a slightly damp dishwash-
ing sponge. Dry it with a cloth afterwards.
Housing
Clean the housing after use with a slightly damp cloth.
Operation
29.08.23
9